ClimaCab | Top Rail Display Option

Welcome to the Top Rail Display Option product listing.  This is the standard option for all ClimaCabs and if no other display option is elected then the ClimaCab will be made with the components described and shown.  All of our display options fundamentally change the way the instruments are stored, therefore we recommend that you take some time to familiarize yourself with the core components before committing to one option or another.

Components

The standard components of the  Top Rail Display Option are described in more detail below.  These components have been tested and perform flawlessly to hang your instruments from the ceiling of the ClimaCab.  

NOTE:  If you elect to implement the Accent Woods option, found by clicking here, the hardwood angled blocks will be made from the accent wood selected.

100% Hardwood Rail

• Two pieces of hardwood running the full horizontal length of ClimaCab

• Cut with opposing angles to the hardwood blocks which slide along the rail

• Secured with screws from the top of the ClimaCab

• Finished with a matching wood plug that is hand sanded flush prior to finishing

• Provides exceptional strength and is the foundation for supporting the instruments hung from it

• Right side of the ceiling an opening provides the ability to add or remove the blocks from the rail

• Customize the number of instruments stored in the ClimaCab as collections change

• NOTE:  Due to installation prior to staining and catalyzed lacquer application, the rail is not available as an Accent Wood location

100% Hardwood Blocks

• Cut with an opposing angle to the hardwood rail

• String Swing Display Case hangers mounted to underside of block

• Provides exceptional strength while allowing the blocks to slide along the rail

• Each ClimaCab size comes with a standard number of blocks based on the maximum number of instruments each size supports

• Additional blocks (with String Swing hangers attached) are available for purchase if additional hanging capacity is desired

String Swing Display Case Hangers

• Safe for a multitude of finishes

• Mounted to underside of hardwood block with screws

• Pivotable 180 degrees allowing for endless display configurations

• Lock into any angle easily with thumb screw

• Yoke is adjustable inwards or outwards with gentle hand pressure to accommodate a variety of headstocks from slim to wide

• Adequate distance from yoke to block for longer headstocks and from yoke to floor of ClimaCab for longer scale instruments